Shop headings: New Spares | Used Spares | Accessories | Brands
Brembo P2 F08 brake caliper piston kit, contains 2 Brembo (P08/P8) coated aluminium pistons
A worthwhile upgrade for earlier twin bleed P08/F08 calipers with steel pistons, seal kits available seperately - BRA37234. Brembo part no. 120225220. Ducati ref. 079739752
More than 5 in stock
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ251 (early models only), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£35.00
INC VAT
£29.17 EX VAT
Inner Tacho (rev counter) Cable (fits inside your old cable outer)
We advise you to measure your existing cable before ordering in case you have a non standard set up.
More than 5 in stock
£5.40
INC VAT
£4.50 EX VAT
Round 12v two pin flasher relay
See FRA17720 for rubber mount
More than 5 in stock
17750520 GU17750520 17 75 05 20
1775 0520 1775.0520 17.75.05.20
£7.60
INC VAT
£6.33 EX VAT
Rubber grommet for clutch bell housing / flywheel timing hole
Timing hole plug or timing hole bung. Also used to fill holes used to mount Griso factory luggage rack
More than 5 in stock
93180220-z 93180220 GU93180220 93 18 02 20
9318 0220 9318.0220 93.18.02.20
£1.60
INC VAT
£1.33 EX VAT
Fuel pipe assembly including 'x' crossover piece
See FUA00004 for pipe clips. Can also be used in place of Guzzi ref. 12106501 on Loop frame models if cut to length
More than 5 in stock
29106500-z 29106500 GU29106500 29 10 65 00
2910 6500 2910.6500 29.10.65.00
Also fits Guzzi V7 Special, V7 700
£20.00
INC VAT
£16.67 EX VAT
Gearbox end cover gasket for 5 speed models
More than 5 in stock
14201110 GU14201110 14 20 11 10
1420 1110 1420.1110 14.20.11.10
£2.80
INC VAT
£2.33 EX VAT
0.6mm shim for selector drum
More than 5 in stock
55235000 GU55235000 55 23 50 00
5523 5000 5523.5000 55.23.50.00
£1.40
INC VAT
£1.17 EX VAT
Dellorto AB264 needle jet or atomiser
More than 5 in stock
28935511 GU28935511 28 93 55 11
2893 5511 2893.5511 28.93.55.11
£8.00
INC VAT
£6.67 EX VAT
8 sided UFI 23 287 00 cartridge oil filter with sealing rubber.
From late 2015 onwards 1200 models used SIA06428
See SIA15301 for alternative filter from Mahle. Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 8 sided oil filter. Use tool TOA41006 if your filter is located inside the sump, use tool TOA01201 if you change your oil filter without removing the sump
See ENA90948 for the oil filter cover o ring
More than 5 in stock
30153000 GU30153000 30 15 30 00
3015 3000 3015.3000 30.15.30.00
£10.00
INC VAT
£8.33 EX VAT
A2 stainless socket cap screw M8 x 55mm, many applications including timing cover bolts on CARC models
More than 5 in stock
£0.90
INC VAT
£0.75 EX VAT